We offer various specifications of High Pressure Glass fibre reinforced thermosetting resin pipes manufactured by micro-controlled filament winding of epoxy resin and high-strength glass fibre roving.
Production Range
Diameter: DN40-DN600;
Pressure rating: 3.45MPa – 34.5MPa
Product standard
API SPEC 15HR-2001 Specification for high pressure fibreglass line pipe
SY/T 6267-2006 Specification for high pressure fibreglass line pipe
Product Characteristics
Excellent mechanical and physical properties, light weight and high-strength
Good corrosion resistance and long service life
No build-up of scale and wax and no secondary contamination
Very smooth inner wall and good flowability of media
Good temperature resistance and can fully meet the requirement of oil production and injection processes
Favourable compressive properties; the normal working pressures are 3.45MPa to 34.5MPa
Easy installation and low comprehensive costs
Range of Application
Wastewater transmission or wastewater treatment pipeline
High-pressure delivery line for petroleum, natural gas, saline water, CO2 and H2S
Connecting pipes for storage tanks and fire hoses.
PRODUCT PARAMETERS
ACID ANHYDRIDE EPOXY GRE PIPE (design as per API-15HR)
Physical properties
Density: 121.74 lbs/ft3
Density: 1.95 g/cm3
Specific gravity: 2.0
Flow coefficient
Hazen-Williams factor: C=150
Absolute roughness: 0.00021” (0.0053mm)
Thermodynamic properties
Heat conductivity coefficient: 0.23BTU/ft/hr/˚F (0.40W/m˚C)
Coefficient of linear expansion: 6.1×10-5in/in/˚F 14×10-6mm/mm˚C)
Elastic coefficient
Hoop elastic modulus: 3.5×106psi (24.1GPa)
Axial elastic modulus: 1.7×106psi (11.9GPa)
Poisson ratio (minimum): 0.38
PRODUCT PARAMETERS
AMINE EPOXY GRP/FRP PIPE (design as per API-15HR)
Physical properties
Density: 112 lbs/ft3 Density: 1.8 g/cm3
Specific gravity: 1.8
Flow coefficient Hazen-Williams factor: C=150
Absolute roughness: 0.00021” (0.0053mm)
Thermodynamic properties
Heat conductivity coefficient: 0.23BTU/ft/hr/˚F (0.40W/m˚C)
Coefficient of linear expansion: 8.8×10-6in/in/˚F (15.8×10-6mm/mm˚C)
Elastic coefficient
Hoop elastic modulus: 3.2×106psi( 22.8GPa)
Axial elastic modulus: 1.82×106psi (12.6GPa)
Poisson ratio (minimum): 0.38
We deliver Low Pressure Pipes fabricated by fixed-length winding technology using glass fibre and its products as reinforcing materials, and a thermosetting resin, such as unsaturated polyester resin or epoxy resin, as the base material.
Production Range
Diameter: DN25-DN2000
Pressure rating: 0.1MPa-6.9MPa Product standard
API Spec 15LR-2002 Specification for low pressure fibreglass line pipe and fittings, 7th Edition
SY/T 6266-2004 Low pressure fibreglass line pipe and fittings
JC 552-2011 Filament-wound thermosetting resin pressured pipe
Product Characteristics
Excellent physical properties, light weight and high-strength
Good corrosion resistance and long service life
Stable chemical structure and no secondary contamination
Good insulation performance and good design ability
Low heat conductivity coefficient and low heat loss
Very smooth inner wall and excellent hydraulic properties
No buildup of scale and wax, saving maintenance costs
Easy installation and low comprehensive costs
Range of Application
Oilfield: oily water transmission pipelines; crude oil transmission pipeline
Chemical: Corrosion-proof pipeline for chemical plants; pipelines for power plants
Municipal works: used for municipal water supply and urban sewage and drainage
Others: GRP cooling towers, smoke flue, etc.
We offer FRP/GRP MOTAR PIPES fabricated by fixed-length winding technology using glass fibre and its products as reinforcing materials, UPR (unsaturated polyester resin) as base material and silica sand as filling.
Production Range
Diameter: DN100-DN4000
Pressure rating: 0.1MPa-2.5MPa
Stiffness class: 1250-10000N/m2
Product standard
GB/T 21238-2007 glass fibre reinforced plastic mortar pipe
Product Characteristics
Excellent physical properties, light weight and high-strength
Good corrosion resistance and long service life
Stable chemical structure and no secondary contamination
Low heat conductivity coefficient and low heat loss • Very smooth inner wall and excellent hydraulic properties
No build-up of scale and wax, saving maintenance costs
Fewer connections, good sealing performance
High design ability
Easy installation and low comprehensive costs
Range of Application
This GRP mortar pipe is widely used in oilfields, chemical industry, urban water supply and drainage, water conservancy construction, power plants, ports and piers, wastewater treatment plants, papermaking, leather making, pharmaceutical engineering and other water-consuming projects.
We offer FRP/GRP Fittings for your pipe system to help connect, control, burn, divert, seal, support, etc.
Production Range
Diameter: DN40-DN4000
Pressure rating: 0.1MPa-25MPa
Product standard
SY/T 6267-2006 Specification for high pressure fibreglass pipe
SY/T 6266-2004 Low pressure fibreglass pipe and fittings
Range of Application
Oilfield: oily water transmission; crude oil transmission
Chemical: Corrosion-proof pipeline for chemical plants; pipelines for power plants
Municipal works: used for municipal water supply and urban drainage
Others: internal components of GRP vessels etc
Product Characteristics
Excellent physical properties, light weight and high-strength
Good corrosion resistance and long service life
Stable chemical structure and no secondary contamination
Good insulation performance and good design ability
Low heat conductivity coefficient and low heat loss
Very smooth inner wall and excellent hydraulic properties
No build-up of scale and wax, saving maintenance costs
Easy installation and low comprehensive costs
We also supply a full range of Telecom and electrical manhole covers, and gully FRP covers of all shapes and sizes.
Our GRP/FRP covers are manufactured from high grade resin and fibre matrix which makes for rigidity, corrosion resistant, and durability
We have a large supply of GRE Tubing manufactured by micro-controlled filament winding epoxy resin combined with high-strength glass fibre roving.
Production Range
Diameter: DN50-DN80
Pressure rating: 10MPa-25Mpa
Can be designed and manufactured according to customer needs Product standard
Q/SXD 002-2011 High pressure glass fibre reinforced epoxy resin downhole tubing
SY/T 6267-2006 Specification for high pressure fibreglass pipe
Range of Application
Down hole oily water injection line
Production tubing
Product Characteristics
Lightweight, easy installation and transportation
High specific strength and reasonable mechanical properties
Good anti-corrosion performance
Low thermal conductivity and low thermal stress
Good electric insulation performance
Good hydraulics performance
Rust-resistant, posing no secondary contamination to the transported media
Anti-contamination and resistance to insects
Good wear resistance and high design ability
We also offer a variety of GRE CASINGS from our various OEM suppliers all across the globe. Whatever your project requirements as per FRP/GRP/GRE/PVC/HDPE Pipes, Fittings and Duct systems, let Pidna be your first port of call, as we are always ready to offer prompt and reliable solutions you can count on.
We have secured leadership position in Nigeria owed to our expertise in the installation of your GRP/GRE/GRV pipe system. Whatever the choice of connection; threaded, bell and spigot joint, socket bonding, T-thread connection , flange connection or hand – lay –up method, Pidna is always at your indulgence and will always deliver within agreed timelines.
Pidna Nig. Ltd. was established after recognizing the growing need for GRP products and the inadequacies bumped into by the use of metals, wood, plastics etc in terms of aridity in designs, affordability, strength and durability, appearance, corrosion and cost of maintenance.
11, Olayemi Street. Opp. Anchor University, Ayobo, lagos, Nigeria
08032291477 07065842795 08038324827
info@pidnanigltd.com.ng
Copyright 2026, Pidna. All Rights Reserved.